Self diagnostics are built into the bikes engine management system .
its a 2 code system
The engine trouble warning light comes on for 3 seconds after the main switch has been set to "ON". If the warning light does not come on under these conditions, the warning light (LED) may be defective
To get the code, your orange engine management light will flash. There are to different flashes a long slow flash and a short fast flash. So 3 long flashes followed by 9 long would be code 39.
here are the fault codes
Fault code 12 - Crankshaft position sensor
Fault code 13 - Intake air pressure sensor
Fault code 14 - Intake air pressure sensor
Fault code 15 - Throttle position sensor
Fault code 16 - TPS
Fault code 19 - No signal from ignition to ecu
Fault code 22 - Intake air temp sensor
Fault code 28 - Engine temp sensor
Fault code 30 - Tip over sensor
Fault code 33 - Ignition coil
Fault code 39 - Fuel injector
Fault code 41 - Tip over sensor
Fault code 44 - Read write error ECU
Fault code 46 - Power supply error to FI system
Fault code 50 - ECU malfunction
No comments:
Post a Comment